 |
:: FREELANCER TEST & TIPP FORUM BLOG :: PC Freeware Specials FAQ Infos Ideen :) ::
:: http://freelancer.greatboard.com ::: PC Freeware - Test - FAQ - Infos - Ideen ::: http://freelancer.forumer.com :: |
|
| Google Search |
|
Custom Search
|
|
| Vorheriges Thema anzeigen :: Nächstes Thema anzeigen |
| Autor |
Nachricht |
^L^
Benutzer
Anmeldungsdatum: 10.08.2005
Beiträge: 485
Wohnort: wien.at
|
 Verfasst am: So. 11-März-2007 (18:33) Titel: TOOLS :::> Test USB Controller On-The-Go Sticks Devices |
 |
|
TOOLSAMMLUNG & SAMMELTHREAD :::>
USB Controller On-The-Go Sticks Devices Informationsprogramme Testingtools udgl.
| Zitat: | Microsoft USBView - USB Connection Viewer
USBView is a free utility from Microsoft that displays the USB connection tree and shows
the USB devices that are connected to it together with their configuration data.
This is very useful for debugging USB enumeration errors. USBView runs under Windows 98, ME, 2000 and XP.
http://www.ftdichip.com/Resources/Utilities.htm
http://www.ftdichip.com/Resources/Utilities/usbview.zip
USBDeview
is a small utility that lists all USB devices that currently connected to your computer,
as well as all USB devices that you previously used.
For each USB device, exteneded information is displayed: Device name/description, device type,
serial number (for mass storage devices), the date/time that device was added, VendorID, ProductID, and more...
USBDeview also allows you to uninstall USB devices that you previously used,
and disconnect USB devices that are currently connected to your computer.
You can also use USBDeview on a remote computer, as long as you login to that computer with admin user.
http://www.nirsoft.net/utils/usb_devices_view.html
____________________________________________________________________________________________ |
| Zitat: | USB.ORG Home > Developers > Tools
http://www.usb.org/developers/tools
Company List
Please download the Company List and save as usb.if in the same directory where USBCV
was installed. Please check the installation instructions for USBCV for details. Remember
this list changes almost daily, be sure to get a fresh copy when you use the tools.
http://www.usb.org/developers/tools/comp_dump
USBCV R1.3 - Windows XP SP2 (English Version) only
NOTE: Please do not install this tool on a machine that already has previous versions of USBCV installed.
This tool requires an Enhanced Host Controller Interface, EHCI. If testing Full or Low-speed devices,
a Hi-Speed USB Hub is also required. USBCV R1.3 uses a special purpose driver for the Hi-Speed USB
Host Controller. USBCV R1.3 automatically replaces the standard Microsoft EHCI host driver
with its own test stack driver. When USBCV R1.3 exits, the original standard Microsoft EHCI host driver
is restored. Stack switching has been extensively tested with Microsoft EHCI drivers only.
Stack switching has not been tested with USB 2.0 host controller drivers provided by other vendors.
Please read the Release Notes for details.
The installation utility, USBCVr13Beta3.msi (4.63 MB), contains USB Command Verifier (USBCV)
version R1.3 and documentation. USBCV R1.3 is the compliance test tool which evaluates High, Full
and Low-speed USB devices for conformance to the USB Device Framework (Chapter 9), Hub device class
(Chapter 11), HID class, and OTG specifications. Beta versions of the Mass Storage Class (MSC)
and USB Video Class (UVC) are also included. MSC and UVC compliance will become mandatory in April 2007.
This version of USBCV was posted on 11/20/2006 . This software release will only work on Windows XP SP2
(English version only) with all critical patches installed. Please check the release notes and accompanying
documentations for details on using USBCV R1.3 and how to provide the USB-IF feedback on issues and
suggestions. This software is provided courtesy of Intel Corporation.
USB Electrical Analysis Tool version 2.12 - Windows XP only
USBET (103MB) is a stand-alone electrical signal analysis tool for USB Compliance testing.
It replaces the antiquated .p code Matlab script files incorporated in the installation file, USBHSET.msi.
USBET accepts .tsv data files generated by USB-IF approved digital oscilloscopes and produces
the familiar .html results files of the analysis. There is no longer any need to purchase a Matlab license
to run the official USB-IF scripts. Please use the login below to download
USBET:
username: usbguest
password: noll5vex
USBHSET.msi version 1.1.0.4 - Windows 2000 or XP only
Version 1.1.04 provides procedure updates for testing legacy free systems
The self-extracting file, USBHSET.exe (1.4 MB), contains the Installation Instruction (ReadMeFirst.pdf)
for the USB High Speed Electrical Test Tool Kit and the installation utility itself.
This tool kit contains the Window-based HSET utility used to initiate test modes.
Detailed test procedures for high-speed host, hub and device electrical testing, tailored to
common test equipment, can be downloaded here . The USB scripts and GPIB software included in this
release are obsolete and should not be used. A new USB Electrical Analaysis Tool is available
separately for download (see USBET above). The procedures for legacy testing can be found in the
USB-IF Compliance Program area. For further information about this tool kit and the installation procedure,
please read the ReadMeFirst.pdf file first. This software provided courtesy of Intel Corporation
USBHTT 1.2 Release - Windows 2000 and Windows XP only
The installation utility, USBHTT.msi (11 MB), contains the USB2 Hub Transaction Translator Test Suite.
USBHTT is a compliance test tool which evaluates Hi-Speed USB Hubs for conformance to the USB Hub
device class (Chapter 11). USBHTT suite focuses on protocol evaluation of the transaction translator unit
in high-speed hubs. The 1.2 release is a requirement for Hi-Speed USB Hub silicon certification.
It is not required for end product hub certification. This version of USBHTT was posted on 7/07/2003.
This software release will only work on Windows 2000 and Windows XP. Please check the release notes
and accompanying documentations for details on using USBHTT and how to provide the USB-IF feedback
on issues and suggestions. Some of the USBHTT tests require custom test devices. These devices may be
ordered from the USB-IF eStore page USBHTT version 1.2 is a maintenance release that fixes
test issues, improves logging features, and removes some tests from required sequences.
As one part of Hi-Speed USB Hub silicon certification process, Hub Silicon Manufacturers use the USB-IF
USBHTT Manufacturer Self-Testing Program to complete USBHTT test requirements.
USB On-The-Go
Two tools for validating USB On-The-Go devices are offered separately in the USB-IF eStore.
OTG Protocol Tester (OPT)
validates both full-speed and high-speed protocols. Software and instructions for the for the OPT
can be downloaded from the USB On-The-Go webpage . The download file includes the latest version
of the OPT software, installation instructions and the OPT user guide.
OTG Electrical Tester (OET)
validates both full-speed and high-speed OTG specific eletricals.
http://www.usb.org/developers/tools
____________________________________________________________________________________________ |
|
|
| Nach oben |
|
 |
|
|
Du kannst keine Beiträge in dieses Forum schreiben.
Du kannst auf Beiträge in diesem Forum nicht antworten.
Du kannst deine Beiträge in diesem Forum nicht bearbeiten.
Du kannst deine Beiträge in diesem Forum nicht löschen.
Du kannst an Umfragen in diesem Forum nicht mitmachen.
|
|
Home
FAQ
Mitgliederliste
Benutzergruppen
fChat
Registrieren
Profil
Messages
Login/Out
